The Partial Family
Features
Reads magnetic stripes and smart cards
ID TECH's Spectrum Hybrid Partial Insert Reader is designed to read on insertion and decode approxi-mately 2½ inches of magnetically-encoded information on one to three tracks.
It reliably reads media encoded to meet ISO 7811 standards. TTL-level “data” and “clock” signals are output for each track.
The reader can also be configured to read and write to Integrated Circuit Cards (ICC or "smart" cards), memory or microprocessor cards conforming to ISO 7816 standards.
The reader itself is approved to EMV specification 3.1.1, and is able to communicate with a host PC via the Microsoft PC/SC smart card interface, if desired.
A "card seated" switch signals when the card has been inserted into the unit and full connection has been made with the ICC contacts.
Vandalismusresistente Leser, Half Card Reader, Einsteckkartenleser, Chipkartenleser, Magnetstreifen-Einsteckkartenleser, Hybridkartenleser
Designed for a wide range of applications
The reader has “card detect” switches both front and back, so it’s easy to tell when the card is fully seated and when it is either partially or fully withdrawn. Electrostatic Discharge (ESD) protection makes the reader well-suited to dry, carpeted environments. Added pressure on the inserted card keeps it from be-ing accidentally pulled out (if tethered, for instance, by a coiled cord). And optional LEDs can illuminate the slot (or the optional translucent bezel) to make it easier to find and use in low levels of light.  
Selects and formats data
The ID TECH Hybrid Partial Insert Reader is a fully-intelligent unit that can be programmed to read only selected tracks from a magnetic stripe, or to output data with terminating characters and up to nine pre-amble or postamble characters in order to match a data format expected by the host.
Works as a drop-in replacement for other units
  There are two different bezels available with the ID TECH Hybrid Partial Insert Reader, depending on the unit being replaced. Both are reinforced with metal, eliminating the need for the mounting bracket re-quired by most other manufacturers. The reader’s chassis is molded from a glass and lubricant-filled en-gineering plastic that supports the magnetic head as well as a PCB with a landing-style smart card con-nector. The magnetic head is spring-loaded for good contact with warped or bowed cards. The smart card connector has gold-plated contacts that “land” on the ICC’s contacts and create a .02 inch “wiping” action to ensure a dependable connection and long life.
   
Model
Product Code
Interface
Latch
Chipstation
Magstripe Track
Smart Card
QI-8507-N00-1NN0N-00
TTL/Direct Output
no
yes
./.
Hybrid
QI-8807-T33-1NN0N-00
TTL
no
yes
1+2+3
Model
Product Code
Interface
Latch
Chipstation
Magstripe Track
Hybrid
QI-8887-T33
RS232
no
yes
1+2+3
Hybrid
QI-8847-T33
USB
no
yes
1+2+3
Smart Card
QI-8587-N00
RS232
no
yes
no